features
Audient EVO 4: Specs and Features of the Compact USB Interface

The Audient EVO 4 is a 2-in, 2-out USB-C audio interface for home recording. According to Audient's published specifications, its two EVO microphone preamps offer a 58 dB gain range, 48 V phantom power and an equivalent input noise below -128 dBu, with a 113 dB A-weighted dynamic range on the analogue-to-digital side. The unit is USB bus powered and runs at up to 24-bit / 96 kHz on Mac, Windows and iOS.
The feature Audient promotes most is Smartgain, which sets input level automatically after you play or sing at the interface for a few seconds. It is aimed at people recording without an engineer - podcasters, streamers and singer-songwriters - who set and ride their own input levels. The front panel also carries a JFET instrument input, the high-impedance connection Audient specifies for plugging an electric guitar or bass in directly.
For streamers and sample-based producers, the EVO 4 includes audio loop-back, which routes the computer's own audio back into the recording path. Monitor Mix and Monitor Pan controls balance live inputs against playback, and there are speaker outputs plus a headphone output on the back and front respectively.
The trade-offs follow from the size. Two inputs cap you at two simultaneous sources - a stereo pair or one microphone and one instrument - and there is no MIDI I/O. The single large knob works with Audient's Smart Touchpoints system, where buttons assign the knob to different functions; that is a deliberate minimal-design choice rather than a dedicated control per function.
Anyone comparing small interfaces should read the specification sheet and Audient's setup video (below) against their own use case. For the stadium end of the music world, see our report on The Lumineers' Automatic World Tour.